LED Inspection

LED Inspection

Glenbrook X-ray systems can be used to look for bad welds, broken wires, solder voids, broken wire bonds etc., on LED Solid State illuminating products and Incandecent bulbs.

A good LED image viewed on a JewelBox fluoroscopic X-ray system with a GTI-5000 software package. This image shows one part of the void measurement feature. Selected item passed inspection based on set parameters.

The RTX-113 Micro-30, JewelBox-70T & Ultra-Compact can be used for LED inspection.


RTX-113 Micro-30™

Smaller Focal Spot for High Resolution Requirements such as Small Hole Drilling, Micro BGA and QFN Inspection

The new RTX-113 Micro 30 X-ray Inspection System, with enormous capability, is compact enough to fit in a lab or on the production floor. The system employs a pc controlled 40 to 80 kV x-ray tube with 30 micron focal spot and our patented XRTV x-ray camera technology now enhanced with Crystal X Imaging for higher contrast. This combination advances our RTX Series for higher resolution and magnification requirements allowing up to 100x geometric and 225x optical magnification.



High Magnification X-ray Inspection of Electronic Assemblies

The JewelBox-70T delivers superior image quality with excellent resolution and sensitivity for laboratory and failure analysis applications. The system’s 10-micron MicroTech™ x-ray source provides magnification from 7X to 2000X, with resolution of 100 line pairs/mm.



Compact, Desktop Version of the JewelBox

Glenbrook Technologies redefines X-ray Inspection with our smallest JewelBox Micro focus x-ray system yet. With dimensions of just 22”W x 26”L, it’s small enough to fit on a standard desk, in an office or small lab. But it’s big in capabilities with >500x magnification ,5 axis manipulator and advanced image processing.

11 Emery Avenue
Randolph, NJ 07869-1308 USA


Join our newsletter and get the latest news and updates!
Subscribe below and be informed.